Water level gauge series
Pluviometer series
Gate level gauge series
Evaporation station series
Display instrument series
Flow velocity series
Flood warning series
Groundwater monitoring equipment
Gate control system
Pumping station control system
Geological disaster prevention
Dam monitoring system
Water regime measuring and reporting system
Telemetry terminal products
Soil moisture monitoring system
Agricultural well irrigation control system
Groundwater level automatic monitoring system
Water level gauge series
Telemetering water level station, integrated water level station, telemetering water level gauge
The water level telemetering station is mainly used for monitoring of canals and reservoirs, groundwater level and groundwater level monitoring, monitoring data transmission through GPRS/GSM, SMS to Beidou satellite monitoring platform.
1. main functions
1.1 gauge (optional free float type water level gauge, pressure type water level gauge, ultrasonic level gauge, radar type water level gauge, bubble type water level gauge, etc. optional) by incremental control, timing control mechanism of the two kinds of data transmission, incremental threshold, the timing cycle can be configured.
1.2 has a large capacity of FLASH storage, rainfall data can be stored for more than 3 years.
1.3 with GPRS/SMS, and short distance wireless communication etc.. In support of the multi center operation mode, telemetry stations can send data to up to 5 central stations, each of which can have two communication channels and backup each other.
1.5 supports three kinds of data communication modes: self reporting, self reporting, acknowledgement and response, and three communication modes can be mixed networking.
1.6 support power down, sleep, permanent online three power management mode.
1.7 support remote wakeup, response center command. Stand dormant in the detection, Center for data collection, terminal ready to wake up any time to read or modify the data recording monitoring station configuration information etc..
1.8 if the need can be equipped with a rainfall sensor.
1.9 increase Beidou satellite communication mode if necessary.
2 technical parameters
2.1 telemetry terminal RTU parameters:
2.1.1 frequency range: 885 ~ 915Mhz 1710 ~ 1755Mhz
2.1.2 takes up bandwidth: less than 200Khz
2.1.3 emission power: 33/30dbm + 2dB
2.1.4 modulation: GMSK
2.1.5 sending mode: timing / quantification, wake-up call test
2.1.6 acquisition interface: parallel I/O (TTL), RS-485 communication, duplex serial communication (TTL), passive contacts and so on
2..17 power supply: 12V ~ 24V DC
2.1.8 operating current: < 0.5mA @6V (sleep), < 12mA @12V (idle), < 100mA @12V (Communication), < 1.5A @12V (peak)
2.1.9 power supply output: the output voltage is equal to the power supply voltage -0.5V, the output current is less than 1A.
2.1.10 working environment: environmental temperature -10 degrees C ~ 45 degrees C (-30 degrees C ~ +65 degrees C alternative), relative humidity less than 95% (40 degrees Celsius).
2.1.11 RTU size weight: shape size (length * width * height): 220 x 90 x 41 (mm), weight: 250g
(without antenna).
2.1.12 mean time to failure (MTBF): 100000h
2.2 water level gauge parameter
1. main functions
1.1 gauge (optional free float type water level gauge, pressure type water level gauge, ultrasonic level gauge, radar type water level gauge, bubble type water level gauge, etc. optional) by incremental control, timing control mechanism of the two kinds of data transmission, incremental threshold, the timing cycle can be configured.
1.2 has a large capacity of FLASH storage, rainfall data can be stored for more than 3 years.
1.3 with GPRS/SMS, and short distance wireless communication etc.. In support of the multi center operation mode, telemetry stations can send data to up to 5 central stations, each of which can have two communication channels and backup each other.
1.5 supports three kinds of data communication modes: self reporting, self reporting, acknowledgement and response, and three communication modes can be mixed networking.
1.6 support power down, sleep, permanent online three power management mode.
1.7 support remote wakeup, response center command. Stand dormant in the detection, Center for data collection, terminal ready to wake up any time to read or modify the data recording monitoring station configuration information etc..
1.8 if the need can be equipped with a rainfall sensor.
1.9 increase Beidou satellite communication mode if necessary.
2 technical parameters
2.1 telemetry terminal RTU parameters:
2.1.1 frequency range: 885 ~ 915Mhz 1710 ~ 1755Mhz
2.1.2 takes up bandwidth: less than 200Khz
2.1.3 emission power: 33/30dbm + 2dB
2.1.4 modulation: GMSK
2.1.5 sending mode: timing / quantification, wake-up call test
2.1.6 acquisition interface: parallel I/O (TTL), RS-485 communication, duplex serial communication (TTL), passive contacts and so on
2..17 power supply: 12V ~ 24V DC
2.1.8 operating current: < 0.5mA @6V (sleep), < 12mA @12V (idle), < 100mA @12V (Communication), < 1.5A @12V (peak)
2.1.9 power supply output: the output voltage is equal to the power supply voltage -0.5V, the output current is less than 1A.
2.1.10 working environment: environmental temperature -10 degrees C ~ 45 degrees C (-30 degrees C ~ +65 degrees C alternative), relative humidity less than 95% (40 degrees Celsius).
2.1.11 RTU size weight: shape size (length * width * height): 220 x 90 x 41 (mm), weight: 250g
(without antenna).
2.1.12 mean time to failure (MTBF): 100000h
2.2 water level gauge parameter
